 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BS107, BS107A Preferred Device Small Signal MOSFET 250 mAmps, 200 Volts N-Channel TO-92 Features http://onsemi.com * AEC Qualified * PPAP Capable * Pb-Free Package is Available* 250 mAMPS, 200 VOLTS RDS(on) = 14 W (BS107) RDS(on) = 6.4 W (BS107A) D Symbol VDS VGS VGSM ID IDM PD TJ, Tstg Value 200 20 30 250 500 350 -55 to 150 mW C TO-92 CASE 29-11 STYLE 30 3 N-Channel MAXIMUM RATINGS Rating Drain-Source Voltage Gate-Source Voltage - Continuous - Non-repetitive (tp 50 ms) Drain Current Continuous (Note 1) Pulsed (Note 2) Total Device Dissipation @ TA = 25C Derate above 25C Operating and Storage Junction Temperature Range Unit Vdc G Vdc Vpk mAdc S MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The Power Dissipation of the package may result in a lower continuous drain current. 2. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. A xxx YWW G G 1 2 xxx = BS107 or BS107A A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device BS107 BS107G BS107A BS107AG Package TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) Shipping 1000 Units/Box 1000 Units/Box 1000 Units/Box 1000 Units/Box BS107ARL1 BS107ARL1G 2000/Ammo Pack 2000/Ammo Pack *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2007 Preferred devices are recommended choices for future use and best overall value. 1 October, 2007 - Rev. 5 Publication Order Number: BS107/D BS107, BS107A ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic OFF CHARACTERISTICS Zero-Gate-Voltage Drain Current (VDS = 130 Vdc, VGS = 0) Drain-Source Breakdown Voltage (VGS = 0, ID = 100 mAdc) Gate Reverse Current (VGS = 15 Vdc, VDS = 0) ON CHARACTERISTICS (Note 3) Gate Threshold Voltage (ID = 1.0 mAdc, VDS = VGS) Static Drain-Source On Resistance BS107 (VGS = 2.6 Vdc, ID = 20 mAdc) (VGS = 10 Vdc, ID = 200 mAdc) BS107A (VGS = 10 Vdc) (ID = 100 mAdc) (ID = 250 mAdc) SMALL-SIGNAL CHARACTERISTICS Input Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Reverse Transfer Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Output Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Forward Transconductance (VDS = 25 Vdc, ID = 250 mAdc) SWITCHING CHARACTERISTICS Turn-On Time Turn-Off Time 3. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. ton toff 6.0 12 15 15 ns ns Ciss Crss Coss gfs 200 60 6.0 30 400 pF pF pF mmhos VGS(Th) rDS(on) 4.5 4.8 28 14 6.0 6.4 1.0 3.0 Vdc W IDSS V(BR)DSX IGSS 200 0.01 30 10 nAdc Vdc nAdc Symbol Min Typ Max Unit RESISTIVE SWITCHING +25 V 23 PULSE GENERATOR Vin 40 pF 50 50 1M 20 dB 50 W ATTENUATOR TO SAMPLING SCOPE 50 W INPUT Vout ton 90% toff 90% 10% 90% 50% 10% PULSE WIDTH 50% OUTPUT Vout INVERTED 10 V INPUT Vin Figure 1. Switching Test Circuit Figure 2. Switching Waveforms http://onsemi.com 2 BS107, BS107A 10 VDS , DRAIN-SOURCE VOLTAGE (VOLTS) 200 180 5.0 C, CAPACITANCE (pF) VGS = 10 V 2.0 1.0 100 mA 0.5 0.2 0.1 -55 250 mA 160 140 120 100 80 60 40 20 -35 -15 85 105 +5.0 25 45 65 TJ, JUNCTION TEMPERATURE (C) 125 145 0 0 Crss 40 10 20 30 VDS, DRAIN - SOURCE VOLTAGE (VOLTS) Coss 50 Ciss VGS = 0 V Figure 3. On Voltage versus Temperature Figure 4. Capacitance Variation 0.8 ID(on) , DRAIN CURRENT (AMPS) VGS = 10 V 0.6 0.5 0.4 0.3 0.2 0.1 0 0 1.0 5.0 6.0 7.0 2.0 3.0 4.0 8.0 VGS, GATE - SOURCE VOLTAGE (VOLTS) 9.0 10 I D(on) , DRAIN CURRENT (AMPS) 0.7 0.7 10 V 0.6 0.5 0.4 0.3 0.2 0.1 0 2.0 10 4.0 6.0 8.0 12 14 16 VDS, DRAIN - SOURCE VOLTAGE (VOLTS) 3.0 V 18 20 4.0 V 5.0 V Figure 5. Transfer Characteristic Figure 6. Output Characteristic 0.7 ID(on), DRAIN CURRENT (AMPS) 0.6 0.5 0.4 0.3 0.2 0.1 1.0 2.0 3.0 4.0 3.0 V 5.0 4.0 V 10 V 5.0 V VDS, DRAIN - SOURCE VOLTAGE (VOLTS) Figure 7. Saturation Characteristic http://onsemi.com 3 BS107, BS107A PACKAGE DIMENSIONS TO-92 (TO-226) CASE 29-11 ISSUE AM A R P L SEATING PLANE B STRAIGHT LEAD BULK PACK NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- K XX G H V 1 D J C SECTION X-X N N DIM A B C D G H J K L N P R V STYLE 30: PIN 1. DRAIN 2. GATE 3. SOURCE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 4 BS107/D |
Price & Availability of BS107ARL1G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |